Neural Network Research Articles

Quantum study of the CH3+ photodissociation in full-dimensional neural network potential energy surfaces.

C H 3 + , a cornerstone intermediate in interstellar chemistry, has recently been detected for the first time by using the James Webb Space Telescope. The photodissociation of this ion is studied here. Accurate explicitly correlated multi-reference configuration interaction abinitio calculations are done, and full-dimensional potential energy surfaces are developed for the three lower electronic states, with a fundamental invariant neural network method. The photodissociation cross section is calculated using a full-dimensional quantum wave packet method in heliocentric Radau coordinates. The wave packet is represented in angular and radial grids, allowing us to reduce the number of points physically accessible, requiring to push up the spurious states appearing when evaluating the angular kinetic terms, through projection technique. The photodissociation spectra, when employed in astrochemical models to simulate the conditions of the Orion bar, result in a lesser destruction of CH3+ compared to that obtained when utilizing the recommended values in the kinetic database for astrochemistry.

Research on disease diagnosis based on teacher-student network and Raman spectroscopy.

Diabetic nephropathy is a serious complication of diabetes, and primary Sjögren's syndrome is a disease that poses a major threat to women's health. Therefore, studying these two diseases is of practical significance. In the field of spectral analysis, although common Raman spectral feature selection models can effectively extract features, they have the problem of changing the characteristics of the original data. The teacher-student network combined with Raman spectroscopy can perform feature selection while retaining the original features, and transfer the performance of the complex deep neural network structure to another lightweight network structure model. This study selects five flow learning models as the teacher network, builds a neural network as the student network, uses multi-layer perceptron for classification, and selects the optimal features based on the evaluation indicators accuracy, precision, recall, and F1-score. After five-fold cross-validation, the research results show that in the diagnosis of diabetic nephropathy, the optimal accuracy rate can reach 98.3%, which is 14.02% higher than the existing research; in the diagnosis of primary Sjögren's syndrome, the optimal accuracy rate can be reached 100%, which is 10.48% higher than the existing research. This study proved the feasibility of Raman spectroscopy combined with teacher-student network in the field of disease diagnosis by producing good experimental results in the diagnosis of diabetic nephropathy and primary Sjögren's syndrome.

Cryptocurrency price fluctuation and time series analysis through candlestick pattern of bitcoin and ethereum using machine learning

PurposeCandlestick charts are a key tool for the technical analysis of cryptocurrency price fluctuations. It is essential to examine trends in the time series of a financial asset when completing an analysis. To accurately examine its potential future performance, it must also consider how it has changed and been active during the period. The researchers created cryptocurrency trading algorithms in this study based on the traditional candlestick pattern.Design/methodology/approachThe data includes information on Bitcoin prices from early 2012 until 2021. Only the engulfing Candlestick model was able to anticipate changes in the price movements of Bitcoin. The traditional Harami model does not work with Bitcoin trading platforms because it has yet to generate profitable business results. An inverted Harami is a successful cryptocurrency trading method.FindingsThe inverted Harami approach accounts for 6.98 profit factor (PrF) and 74–50% of profitable (Pr) transactions, which favors a particularly long position. Additionally, the study discovered that almost all analyzed candlestick patterns forecast longer trends greater than shorter trends.Research limitations/implicationsTo statistically study its future potential return, examining how it has changed and been active over the years is necessary. Such valuations are the basis for trading strategies that could help traders and investors in the cryptocurrency market. Without sacrificing clarity or ease of application, the proposed approach has increased performance by up to 32.5% of mean absolute error (MAE).Originality/valueThis study is novel in that it used multilayer autoregressive neural network (MARN) models with crypto-net (CNM) in machine learning to analyze a time series of financial cryptocurrencies. Here, the primary study deals with time trends extracted through a neural network model. Then, the developed model was tested using Bitcoin and Ethereum. Finally, CNM validity was tested through linear regression.

Searching for LINCS to Stress: Using Text Mining to Automate Reference Chemical Curation.

Adaptive stress response pathways (SRPs) restore cellular homeostasis following perturbation but may activate terminal outcomes like apoptosis, autophagy, or cellular senescence if disruption exceeds critical thresholds. Because SRPs hold the key to vital cellular tipping points, they are targeted for therapeutic interventions and assessed as biomarkers of toxicity. Hence, we are developing a public database of chemicals that perturb SRPs to enable new data-driven tools to improve public health. Here, we report on the automated text-mining pipeline we used to build and curate the first version of this database. We started with 100 reference SRP chemicals gathered from published biomarker studies to bootstrap the database. Second, we used information retrieval to find co-occurrences of reference chemicals with SRP terms in PubMed abstracts and determined pairwise mutual information thresholds to filter biologically relevant relationships. Third, we applied these thresholds to find 1206 putative SRP perturbagens within thousands of substances in the Library of Integrated Network-Based Cellular Signatures (LINCS). To assign SRP activity to LINCS chemicals, domain experts had to manually review at least three publications for each of 1206 chemicals out of 181,805 total abstracts. To accomplish this efficiently, we implemented a machine learning approach to predict SRP classifications from texts to prioritize abstracts. In 5-fold cross-validation testing with a corpus derived from the 100 reference chemicals, artificial neural networks performed the best (F1-macro = 0.678) and prioritized 2479/181,805 abstracts for expert review, which resulted in 457 chemicals annotated with SRP activities. An independent analysis of enriched mechanisms of action and chemical use class supported the text-mined chemical associations (p < 0.05): heat shock inducers were linked with HSP90 and DNA damage inducers to topoisomerase inhibition. This database will enable novel applications of LINCS data to evaluate SRP activities and to further develop tools for biomedical information extraction from the literature.

GPSFun: geometry-aware protein sequence function predictions with language models.

Knowledge of protein function is essential for elucidating disease mechanisms and discovering new drug targets. However, there is a widening gap between the exponential growth of protein sequences and their limited function annotations. In our prior studies, we have developed a series of methods including GraphPPIS, GraphSite, LMetalSiteand SPROF-GO for protein function annotations at residue or protein level. To further enhance their applicability and performance, we now present GPSFun, a versatile web server for Geometry-aware Protein Sequence Function annotations, which equips our previous tools with language models and geometric deep learning. Specifically, GPSFun employs large language models to efficiently predict 3D conformations of the input protein sequences and extract informative sequence embeddings. Subsequently, geometric graph neural networks are utilized to capture the sequence and structure patterns in the protein graphs, facilitating various downstream predictions including protein-ligand binding sites, gene ontologies, subcellular locationsand protein solubility. Notably, GPSFun achieves superior performance to state-of-the-art methods across diverse tasks without requiring multiple sequence alignments or experimental protein structures. GPSFun is freely available to all users at https://bio-web1.nscc-gz.cn/app/GPSFun with user-friendly interfaces and rich visualizations.

Web-based diagnostic platform for microorganism-induced deterioration on paper-based cultural relics with iterative training from human feedback

PurposePaper-based artifacts hold significant cultural and social values. However, paper is intrinsically fragile to microorganisms, such as mold, due to its cellulose composition, which can serve as a microorganisms’ nutrient source. Mold not only can damage papers’ structural integrity and pose significant challenges to conservation works but also may subject individuals attending the contaminated artifacts to health risks. Current approaches for strain identification usually require extensive training, prolonged time for analysis, expensive operation costs, and higher risks of secondary damage due to sampling. Thus, in current conservation practices with mold-contaminated artifacts, little pre-screening or strain identification was performed before mold removal, and the cleaning techniques are usually broad-spectrum rather than strain-specific. With deep learning showing promising applications across various domains, this study investigated the feasibility of using a convolutional neural network (CNN) for fast in-situ recognition and classification of mold on paper.MethodsMolds were first non-invasively sampled from ancient Xuan Paper-based Chinese books from the Qing and Ming dynasties. Strains were identified using molecular biology methods and the four most prevalent strains were inoculated on Xuan paper to create mockups for image collection. Microscopic images of the molds as well as their stains situated on paper were collected using a compound microscope and commercial microscope lens for cell phone cameras, which were then used for training CNN models with a transfer learning scheme to perform the classification of mold. To enable involvement and contribution from the research community, a web interface that actuates the process while providing interactive features for users to learn about the information of the classified strain was constructed. Moreover, a feedback functionality in the web interface was embedded for catching potential classification errors, adding additional training images, or introducing new strains, all to refine the generalizability and robustness of the model.Results & ConclusionIn the study, we have constructed a suite of high-confidence classification CNN models for the diagnostic process for mold contamination in conservation. At the same time, a web interface was constructed that allows recurrently refining the model with human feedback through engaging the research community. Overall, the proposed framework opens new avenues for effective and timely identification of mold, thus enabling proactive and targeted mold remediation strategies in conservation.

Stiffness-tunable biomaterials provide a good extracellular matrix environment for axon growth and regeneration

Abstract Neuronal growth, extension, branching, and formation of neural networks are markedly influenced by the extracellular matrix–a complex network composed of proteins and carbohydrates secreted by cells. In addition to providing physical support for cells, the extracellular matrix also conveys critical mechanical stiffness cues. During the development of the nervous system, extracellular matrix stiffness plays a central role in guiding neuronal growth, particularly in the context of axonal extension, which is crucial for the formation of neural networks. In neural tissue engineering, manipulation of biomaterial stiffness is a promising strategy to provide a permissive environment for the repair and regeneration of injured nervous tissue. Recent research has fine-tuned synthetic biomaterials to fabricate scaffolds that closely replicate the stiffness profiles observed in the nervous system. In this review, we highlight the molecular mechanisms by which extracellular matrix stiffness regulates axonal growth and regeneration. We highlight the progress made in the development of stiffness-tunable biomaterials to emulate in vivo extracellular matrix environments, with an emphasis on their application in neural repair and regeneration, along with a discussion of the current limitations and future prospects. The exploration and optimization of the stiffness-tunable biomaterials has the potential to markedly advance the development of neural tissue engineering.

Potential of Large Language Models in Health Care: Delphi Study.

A large language model (LLM) is a machine learning model inferred from text data that captures subtle patterns of language use in context. Modern LLMs are based on neural network architectures that incorporate transformer methods. They allow the model to relate words together through attention to multiple words in a text sequence. LLMs have been shown to be highly effective for a range of tasks in natural language processing (NLP), including classification and information extraction tasks and generative applications. The aim of this adapted Delphi study was to collect researchers' opinions on how LLMs might influence health care and on the strengths, weaknesses, opportunities, and threats of LLM use in health care. We invited researchers in the fields of health informatics, nursing informatics, and medical NLP to share their opinions on LLM use in health care. We started the first round with open questions based on our strengths, weaknesses, opportunities, and threats framework. In the second and third round, the participants scored these items. The first, second, and third rounds had 28, 23, and 21 participants, respectively. Almost all participants (26/28, 93% in round 1 and 20/21, 95% in round 3) were affiliated with academic institutions. Agreement was reached on 103 items related to use cases, benefits, risks, reliability, adoption aspects, and the future of LLMs in health care. Participants offered several use cases, including supporting clinical tasks, documentation tasks, and medical research and education, and agreed that LLM-based systems will act as health assistants for patient education. The agreed-upon benefits included increased efficiency in data handling and extraction, improved automation of processes, improved quality of health care services and overall health outcomes, provision of personalized care, accelerated diagnosis and treatment processes, and improved interaction between patients and health care professionals. In total, 5 risks to health care in general were identified: cybersecurity breaches, the potential for patient misinformation, ethical concerns, the likelihood of biased decision-making, and the risk associated with inaccurate communication. Overconfidence in LLM-based systems was recognized as a risk to the medical profession. The 6 agreed-upon privacy risks included the use of unregulated cloud services that compromise data security, exposure of sensitive patient data, breaches of confidentiality, fraudulent use of information, vulnerabilities in data storage and communication, and inappropriate access or use of patient data. Future research related to LLMs should not only focus on testing their possibilities for NLP-related tasks but also consider the workflows the models could contribute to and the requirements regarding quality, integration, and regulations needed for successful implementation in practice.

Deep Learning Model for Cosmetic Gel Classification Based on a Short-Time Fourier Transform and Spectrogram.

Cosmetics and topical medications, such as gels, foams, creams, and lotions, are viscoelastic substances that are applied to the skin or mucous membranes. The human perception of these materials is complex and involves multiple sensory modalities. Traditional panel-based sensory evaluations have limitations due to individual differences in sensory receptors and factors such as age, race, and gender. Therefore, this study proposes a deep-learning-based method for systematically analyzing and effectively identifying the physical properties of cosmetic gels. Time-series friction signals generated by rubbing the gels were measured. These signals were preprocessed through short-time Fourier transform (STFT) and continuous wavelet transform (CWT), respectively, and the frequency factors that change over time were distinguished and analyzed. The deep learning model employed a ResNet-based convolution neural network (CNN) structure with optimization achieved through a learning rate scheduler. The optimized STFT-based 2D CNN model outperforms the CWT-based 2D and 1D CNN models. The optimized STFT-based 2D CNN model also demonstrated robustness and reliability through k-fold cross-validation. This study suggests the potential for an innovative approach to replace traditional expert panel evaluations and objectively assess the user experience of cosmetics.

The Impact of Drop Test Conditions on Brain Strain Location and Severity: A Novel Approach Using a Deep Learning Model.

In contact sports such as rugby, players are at risk of sustaining traumatic brain injuries (TBI) due to high-intensity head impacts that generate high linear and rotational accelerations of the head. Previous studies have established a clear link between high-intensity head impacts and brain strains that result in concussions. This study presents a novel approach to investigating the effect of a range of laboratory controlled drop test parameters on regional peak and mean maximum principal strain (MPS) predictions within the brain using a trained convolutional neural network (CNN). The CNN is publicly available at https://github.com/Jilab-biomechanics/CNN-brain-strains . The results of this study corroborate previous findings that impacts to the side of the head result in significantly higher regional MPS than forehead impacts. Forehead impacts tend to result in the lowest region-averaged MPS values for impacts where the surface angle was at 0° and 45°, while side impacts tend to result in higher regional peak and mean MPS. The absence of a neck in drop tests resulted in lower regional peak and mean MPS values. The results indicated that the relationship between drop test parameters and resulting regional peak and mean MPS predictions is complex. The study's findings offer valuable insights into how deep learning models can be used to provide more detailed insights into how drop test conditions impact regional MPS. The novel approach used in this paper to predict brain strains can be applied in the development of better methods to reduce the brain strain resulting from head accelerations such as protective sports headgear.

Multitask Learning Deep Neural Networks Enable Embedded Design of Active Metamaterials.

In this study, we propose and implement a deep neural network framework based on multitask learning aimed at simplifying the forward modeling and inverse design process of photonic devices integrating active metasurfaces. We demonstrate and validate our approach by constructing a continuously tunable bandpass filter that is effective in the midwave infrared region. The key to this filter is the combination of a metasurface and Fabry-Perot (F-P) cavity structure of the tunable phase-change material Ge2Sb2Se4Te (GSST) and the precise control of the crystallinity of the GSST by a silicon-based heater. With the help of a deep learning framework, we are able to independently model the crystallinity and geometric parameters of the filter to maximize the use of GSST tuning for bandpass filtering. Our model discusses the self-attention mechanism and the effect of noise and compares several existing popular algorithms, and the results show that a multitask deep learning strategy can better assist the on-demand reverse design of photonic structures with phase change materials. This opens up new possibilities for personalization and functional extension of optical devices.

Music Information Retrieval using Deep Learning Techniques

Music Information Retrieval (MIR) is gaining attention due to the surge in digital music and the need for efficient search and recommendation systems. Traditional MIR methods rely on hand-crafted features and rule-based systems, limiting their adaptability. Deep Learning (DL) shows promise in automatically extracting complex patterns from raw data. This paper offers an extensive overview of MIR tasks like classification, genre recognition, similarity search, and recommendation, along with DL models like Convolutional Neural Networks (CNNs), Recurrent Neural Networks (RNNs), including LSTM and Transformer architectures, tailored for MIR. Challenges such as data scarcity, computational complexity, and interpretability persist, with proposed solutions like data augmentation, transfer learning, and attention mechanisms. Experimental results on benchmark datasets demonstrate DL's superiority in accuracy, scalability, and robustness over traditional methods. Practical examples highlight DL's potential to revolutionize music search, recommendation, and analysis. Emphasizing the importance of large annotated datasets for training high-quality DL models, strategies for data collection, labeling, and preprocessing are outlined. DL offers promising prospects for advancing MIR by addressing its inherent challenges and establishing new performance benchmarks. Further DL development is expected to drive innovation and enhance digital music consumption experiences through MIR systems. Keywords: Deep Learning, Convolution Neural Network (CNNs), Recurrent Neural Network (RNNs), Digital Music Consumption, Genre recognition.

ARTIFICIAL INTELLIGENT SYSTEM FOR AUTOMATIC DEPRESSION LEVEL ANALYSIS THROUGH VISUAL AND VOCAL EXPRESSIONS

Depression is a major mental health disease of human which is rapidly affecting lives worldwide. Early detection and intervention are crucial for effective treatment and management. Depression is regularly identified with thoughts of suicide. Significant depression can bring about a determination of social and physical side effects. It could remember changes in rest, craving, vitality level, concentration, day by day conduct or confidence. In recent years, deep-learned applications concentrated on neural networks have shown superior performance at hand-crafted apps in various areas. This system presents an innovative artificial intelligence (AI) system designed for automatic depression level analysis by analyzing visual and vocal expressions. Leveraging advances in computer vision and natural language processing, the proposed system extracts relevant features from facial expressions and speech patterns to assess depression severity levels accurately. Deep-learned apps that settle the above issues that may precisely assess the degree of voice and face depression. In the proposed method, Convolutionary Neural Networks (CNN) is developed for learning deep-learned features and descriptive raw waveforms for visual expressions. Second. Keywords: Artificial Intelligence, Depression, Vocal, Facial Expressions, Deep Learning

AI DRIVEN BLOOD CELL ANALYSIS FOR MALARIA AND BLOOD CANCER SCREENING

Malaria and blood Cancer is one of the deadliest diseases cross the globe. This is caused by the bite of female Anopheles mosquito that transmits the Plasmodium parasites. Some current malaria detection techniques include manual microscopic examination and RDT. These approaches are vulnerable to human mistakes. Early detection of malaria can help in reducing the death rates across the globe.Deep Learning can emerge as a highly beneficial solution in the diagnosis of disease. This model gives a faster and cheaper method for detecting plasmodium parasites. It Was Designed to Identify Malaria Parasites and Cancerous Cell Presence in Blood Using Images of Blood Samples which got Tested with Giemsa-stain. Convolutional neural networks (CNNs) are then trained on these extracted features to accurately classify blood cell images into disease positive or disease-negative categories. The CNN detects malaria parasites in microscopic images by classifying them into parasitized and healthy cells, enabling the detection of malaria parasites. The proposed model consists of three convolutional layers and fully connected layers each. The neural network presented is a cascade of several convolutional layers having multiple filters present in layers, which yields the exceptionally good accuracy as per the available resources. The experiment results demonstrate a significant improvement in malaria parasite and blood cancer recognition. Compared to traditional manual microscopy, the proposed system is more accurate and faster. Finally, this study demonstrates the need to provide robust and efficient solutions by leveraging state-of-the-art technologies to combat malaria and blood cancer. Keywords : Deep Learning, CNN, Image analysis , InceptionresnetV2

A digital twin model of the axial temperature field of a DC cable for millisecond calculations

The most important features of digital twin technology for transmission and transformation equipment are symbiotic evolution and state prediction. In constructing the digital twin model for DC cables, the transient and steady-state temperature fields need to be considered comprehensively in the modeling process to consider the multi-physical field coupling, mathematical model, operational data, and environmental conditions in specific cases, which makes it difficult to satisfy the real-time requirements of the digital twin. To solve this problem, in this paper, a digital twin technology architecture for DC cables is proposed, and a neural network learning model is constructed to minimize the latency due to the complexity of the model simulation. Moreover, an efficient digital twin model that is based on the model-driven approach is developed for the fast computation of the axial temperature field of DC cables. The use of the Sequence-to-Sequence residual neural network algorithm for the reduced-order multi-physics field coupling modeling reduces the computational time and ensures as much accuracy as possible up to the finite element model simulation. The simulation results show that the use of the digital twin model reduces the simulation time from 275 s to 0.56 s, and the relative error between the accuracy of the digital twin model and the finite element model for the axial temperature field of the DC cable is 0.46 %. Finally, verification of the reasonableness and feasibility of the proposed method is carried out via an experimental platform according to the standard of CIGRE TB496. In particular, the maximum value of the DC cable temperature is verified to have a small error compared with the result of the Sequence-to-Sequence calculation under specific working conditions.

ОДНОВИМІРНА ЗГОРТКОВА МОДЕЛЬ НЕЙРОННОЇ МЕРЕЖІ ДЛЯ ОБРОБЛЕННЯ СИГНАЛІВ З АМПЛІТУДНОЮ МОДУЛЯЦІЄЮ БАГАТЬОХ СКЛАДОВИХ

The processing of radio signals using artificial neural networks (ANNs) has great potential for research, which can be explained by the adaptability of ANNs to various transmission conditions and the ability to detect abstract patterns of changes in signal parameters. The article reviews the works of other authors devoted to different ways of using ANNs for processing radio signals. Taking into account the information in the reviewed works, the research task was formed, which consists in developing an optimized ANN model for radio signal processing. Signals with amplitude modulation of many components (AMMC) were chosen to form training samples for ANN. The choice of modulation type is justified by greater energy efficiency compared to other widely used digital modulation types, such as quadrature amplitude modulation. Mathematic basis of AMMC signal generation is described. The process of finding the coordinates of three component 8-AMMC signal constellation is explained, the formation of signals in the time plane based on the found coordinates is explained as well as their discretization and the addition of white noise. An iterative algorithm for generating initial data for ANN based on the described ratios is proposed. The general structure of one-dimensional convolutional neural network is considered. Functions of individual neurons, connections between them, the formation of layers and the convolution operation are described mathematically. On the basis of the previously given ratios, a final display of the network was formed. Specific dimensions and activation functions for layers are selected. The use of convolutional layers is justified by time invariance. Based on the reviewed mathematical models, selected activation functions and dimensions, a neural model was formed. The process of validating the effectiveness of the formed neural model is described, which is based on comparing the symbolic error probabilities of the proposed and reference models at different signal-to-noise ratios. The validation results are presented. The advantages of the obtained model over the previously proposed purely recurrent model and the AMMC reference receiver are explained.

ДОСЛІДЖЕННЯ КОНТЕКСТНО-ЧУТЛИВОГО АЛГОРИТМУ МОНІТОРИНГУ КІБЕРБЕЗПЕКИ НА ОСНОВІ РЕКУРЕНТНИХ НЕЙРОННИХ МЕРЕЖ

The most common problems faced by modern information and communication systems (ICS) in the context of combating cyber threats were examined in the paper. The importance of ensuring the reliable operation of ICS, and protecting their users' private data from unauthorized interception or destruction was emphasized. The main principles of effective protection of ICS systems against possible interference in their work were defined. The classification of cyber threats and their impact on the functioning of information systems was presented. Features of the use of modern information technologies were determined, such as machine learning (ML), and recurrent neural networks (RNN) for increasing the effectiveness of detecting and preventing such threats, speeding up the process of calculating large volumes of information about various aspects of the work of information and communication systems. The parameters of the analysis of ICS behavior, which indicate the presence of problems in cyber security, were studied. The features and advantages of deploying RNN in ICS were analyzed, which makes it possible to simplify the tasks of cyber defense. A modified context-sensitive algorithm for cyber security monitoring (CCM-RNN) was proposed, which is based on RNN and allows taking into account the dynamics of system changes in the established context, for example, the type or volume of traffic from users, etc. The method of selecting the most effective parameters and properties of ICS for detecting cyber threats was improved. The results of the study of the effectiveness of the use of the modified CCM-RNN algorithm demonstrated its broad capabilities for fast and accurate detection of anomalies in the operation of ICs that may threaten their cyber security. By changing the number of properties of the CCM-RNN algorithm, which correspond to the characteristics of various aspects of the IC, it is possible to achieve the maximum accuracy of cyber threat detection. The modified algorithm also allows for the reduction of the duration of calculations during analysis. Based on the research results, a conclusion was made about the feasibility of using the proposed modified CCM-RNN algorithm for the ability to detect cyber security threats in ICS by flexibly adjusting the number and type of learning parameters of neural networks. In this way, the accuracy and duration of calculations were optimized, as well as the peculiarities and contexts of information and communication systems were taken into account.

Deep convolutional neural network based synthetic minority over sampling technique: a forfending model for fraudulent credit card transactions in financial institution

Today, fraudulent credit card transaction are committed by unauthorized individuals and organization exploring methods such as phishing and social engineering fraud. Several researchers proposed Machine Learning (ML) techniques to serve as solutions to credit card fraud detection. However, ML suffers imbalance class distribution, high dimensionality and sparsity problem. These concerns make it extremely difficult in credit card fraud detection. Therefore, this study proposes Deep Convolutional Neural Network (DCNN) with Synthetic Minority Oversampling Techniques (SMOTE) to serve as an ideal solution. Data augmentation method of SMOTE oversampling techniques is incorporated into the DCNN that solve the class imbalance trial and in improving the performance. Datasets with 284807 records with 31 features gotten via Kaggle repository is used. Implementation is carried out on Google Colab containing cloud-based platform embedding Jupyter notebook environment with Graphical processing unit (GPUs). Two experiment were carried out where the first experiment is used to determine suitable models among baseline techniques: Logistics Regression (LR), Random Forest (RF), Isolation forest, and single DL model of Multiple layer perceptron (MLP). The baseline models yielded an overfitting accuracy score, with recall, specificity, precision, and F1-score all presenting 1.00% respectively. This outcome is not sufficient in establishing findings on imbalance data distribution as its biased. This led to the construction of a new ML model absorbing Light Gradient Boosting Machine (LGBM), with Artificial Neural Network (ANN) and proposed DCNN+SMOTE for the second experiment phase alongside baseline models. Experimental results via simulation show the proposed DCNN+SMOTE yielded overwhelming superclass performance across board displaying 1.00% results respectively better than baseline models. It Error Rate (ER) and Null Error Rate (NER) is 0.00% distinctly. While, the False Positive Rate (FPR) yields 0.001% result lesser than the baseline models.

Downscaling Future Precipitation over Mi Oya River Basin using Artificial Neural Networks

Studying future precipitation behaviour in river basins is essential for proper water resources and land-use planning within them, as this will help to reduce the risk and mitigate disasters that can occur in the future. General Circulation Models (GCMs) are used to study future precipitation fluctuations, which simulate large-scale climate variations under the effect of greenhouse gas changes. The GCM runs at a coarse spatial resolution which cannot be directly used for climate impact studies. Therefore, downscaling is required to extract the sub-grid and local scale information. This study examines the use of the Long Short-Term Memory (LSTM) neural network for climate downscaling to the Mi-Oya river basin in Sri Lanka using CNRM-CM5 and HadCM3 GCMs and observed annual data for 35 years. The precipitation data were extracted to cover Sri Lanka. Current downscaling models mostly use Convolutional Neural Networks (CNNs) to downscale GCMs. Out of 42 GCMs, two appropriate GCMs were chosen using the data analysis tool Data Integration and Analysis System (DIAS). The best predictor variables were chosen using the LASSO regression method. In this research, Machine Learning models were implemented using the Google TensorFlow platform. The Nash–Sutcliffe coefficient, Pearson correlation coefficient, and root-mean-square error performance indices were used to evaluate the performances of different downscaling models. Statistical downscaling was performed on the data at RCP 2.6, 4.5, and 8.5 using a LSTM. Subsequently, the changes that would take place by the year 2100 were analysed. The results show that precipitation will be reduced in the 2nd and 3rd decades of the 21st century, and precipitation will increase toward the 22nd century.

FOOD CLASSIFICATION AND CALORIE ESTIMATION USING CNN

This research paper explores the transformative impact of deep learning methodologies in the domains of food image recognition, classification, and calorie estimation. By utilizing the convergence of machine learning with convolutional neural networks (CNNs), the study tackles the growing concerns surrounding obesity and health difficulties, highlighting the need for creative methods of nutritional monitoring. Motivated by challenges in fruit classification and the limitations of traditional methods, the research progressively shifts towards efficient and accurate image-based approaches, particularly highlighting the effectiveness of CNNs. The methodology focuses on machine learning-based approaches for food calorie estimation, with a specific emphasis on parameter-optimized lightweight CNN models utilizing TensorFlow's Object Detection API and CNN. The results showcase impressive accuracy levels, often exceeding 90%, across diverse food items, albeit with persistent challenges such as limited datasets, computational costs, and real-world application constraints. In conclusion, this comprehensive review underscores the transformative potential of deep learning in fostering healthier lifestyles, combating obesity, and providing valuable insights for dietary guidance and health management. Further research is recommended to enhance dataset representativeness and optimize model generalization for broader practical applicability Keywords: Calorie estimation, Classification, Convolutional neural network, Object detection.